High-Performance Aluminum Aerial Bundled Cable for Overhead Insulation

Product Description

Product Description

 

Application:
  ABC cable: That is, overhead type bundled cable, widely used in many underdeveloped areas, including 1 core, 2 cores, 3 cores, 4 cores: Covered line wire, Duplex service drop, Triplex service drop, Quadruple x Service Drop. It includes all insulated cores, two insulated cores with one bare conductor, three insulated cores with one bare conductor, pure aluminum or pure aluminum and aluminum alloy mixed with stranded, etc.
Features:
Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead cable.Suitable for rated voltage 0.6/1kV and below in overhead power lines, can be used as fixed laying or lead-in line, and also for low-voltage cable distribution.t provides a higher level of safety and reliability, lower power losses, and ultimate system economy by reducing installation, maintenance, and operative cost. LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole), or for street lighting. This overhead cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if the requested change to a flame retardant cable. 
Duplex service drop wire, whose main component is 1350-H19 aluminum, with concentrically stranded phase wires and PVC or XLPE insulation. The neutral core is made of concentrically stranded AAC, ACSR, or 6201 aluminum alloy. Primarily used for 120V overhead service applications such as street lighting, outdoor lighting, and temporary building services. The voltage between phases is 600V and below, and the conductor temperature does not exceed 75°C for PVC-insulated conductors and 90°C for XLPE-insulated conductors.




Required Standard
Standard:
0.6/1KV overhead insulated cable: GB12527-90 is equivalent to IEC60502 and IEC227 of the International Electronically Commission.
6/10KV overhead insulated cable: GB14049-93 is equivalent to IEC60502 of the International Electronically Commission.
Additional standard: BS 7870 / TNB Specification (IEC 60502) / HD 626 S1 / NFC 33-209 / AS/NZS 3560-1 standards.
Service characteristics
Rated Voltage: 1KV/10KV
Operation Temperature:
The maximum allowable long-term operating temperature of the conductor is -40°C~ +90°C
Environment Temperature:
Laying Temperature:
  The laying temperature of the cable should not be lower than -20ºC.
Bending Radius:
Rated voltage 1KV cable: The cable outer diameter (D) less than 25mm, should not be less than 4D, and cable outer diameter (D) of 25mm and above, should not be less than 6D.
Rated voltage 10KV cable: The cable outer diameter should not be less than 20 (D + d) where D minus the actual outer diameter of the cable.

Product Parameters

number of cores xNominal cross Section	overall diameter	weight	Maxinum conductor Resistance	Minimun breaking Load	current Rating
No.xmm2	mm	kg/km	Ω/Km	KN	A
1x16+1x25 RM	15.3	160	1,910	2,5	72
3x16+1x25 RM	19	290	1,200	4,0	107
3x25+1x25 RM	23.2	400	0,868	5,5	132
3x35+1x25 RM	25.6	500	0,641	8,0	165
3x50+1x35 RM	30	680	0,443	10,7	205
3x70+1x50 RM	34.9	920	0,320	13,7	240
3x95+1x70 RM	40.6	1270	0,253	18,6	290
3x120+1x70 RM	44.1	1510	0,206	23,2	334
3x150+1x95 RM	49.2	1870	0,164	28,7	389
3x185+1x120 RM	54.9	2340	0,125	37,2	467
3x25+1x25+1x16 RM	23.2	470	1,910	2,5	72
3x35+1x25+1x16 RM	25.6	560	1,200	4,0	107
3x50+1x35+1x16 RM	30	740	0,868	5,5	132
3x70+1x50+1x16 RM	34.9	980	0,641	8,0	165
3x95+1x70+1x16 RM	40.6	1330	0,443	10,7	205
3x120+1x70+1x16 RM	44.1	1580	0,320	13,7	240
3x150+1x95+1x16 RM	49.2	1940	0,206	23,2	334
3x185+1x120+1x16 RM	54.9	2410	1,910	2,5	72

Company Profile

 

Certifications

 

Packaging & Shipping

FAQ