Application: | Construction |
---|---|
Voltage: | Low and Medium Voltage Cable |
Current: | DC Cable |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Scope of application
For the direct current (d.c.) side of photovoltaic systems
Occasion
Suitable for photovoltaic devices, For example, HD 60364-7-712. It can be used permanently both outdoors and indoors, and can be freely moved, freely hung and fixed. It can also be installed in conduits and troughs under gypsum and in electrical appliances. Suitable for in-plant/field applications with protective insulation (protection Class II). According to HD 60364-5-52, inherent protection against short circuit and ground faults
Product characteristics
The product has the characteristics of high temperature resistance, ozone resistance, UV resistance, short time overload ability, long life, oil resistance, wear resistance, corrosion resistance, high tensile strength and so on
Compliant standard
Executive standard
EN 50618:2014
Service characteristics
Rated voltage:The power frequency AC rated voltage is 0.45/0.75kV, and the maximum voltage of the AC system should not exceed 1.0kV.
Operating temperature:Cable conductor allows the highest working temperature120 ºC for a long time. ;During a short circuit, the maximum temperature of the cable conductor shall not exceed 250°C and the duration shall not exceed 5s.
Ambient temperature
60 ° C.
Laying temperature
Maximum storage temperature: +40ºC; .
Minimum temperature for installation and transportation: -25ºC
Identification of product
Wire core
The insulated cable core is preferably black
Sheath
The sheathing shall be black unless otherwise agreed by the manufacturer and the customer. The surface of the cable jacket shall be printed with the name of the manufacturer or its code, the year of manufacture and the product mark. Mark spacing should not be greater than 550mm. Signs should be legible and not easily erased.
Bending radius
The recommended bending radius is shown in Table 3, EN 50565-1:2014
Suppliers with verified business licenses